Mediana P10 Manual de Serviço descarregar pdf (Página 78)

C6. SMPS disassembly

1. Remove the SMPS control cable, DC power cable, external DC cable and battery cable

from the SMPS.

2. Remove 5 round-head screws (3x6) from the SMPS.

3. Separate the SMPS from the inner case.

C6-1. AC inlet board disassembly

1. Remove the AC holder from the SMPS.

2. Remove 2 round-head screws (3x6) from the AC inlet board.

3. Separate the AC inlet cable from the AC inlet board.

4. Remove the AC inlet board from the AC holder.

5. Remove the GND pin form the AC inlet board.

C7. Speaker disassembly

1. Separate the speaker wire from the printer interface board.

2. Remove the 2 round-head screws (3x6) from the speaker.

3. Remove the speaker from the inner case.

C8. ECG arrester board disassembly

1. Remove the ECG arrester cable from the ECG arrester board.

2. Remove 2 round-head screws (3x6) from the ECG arrester board.

3. Remove the ECG arrester from the inner case.

C9. Printer interface board disassembly

1. Separate the printer interface cable from the printer interface board.

2. Remove 2 flat-head screws (2x4) from the printer interface board.

3. Remove the printer interface board from the inner case.

C10. TCP/IP connector board or TCP/IP assembly board (option)

disassembly

1. Separate the TCP/IP cable from the TCP/IP connector board or TCP/IP assembly

board (option).

2. Remove 1 round-head screw (3x6) from the TCP/IP connector board or TCP/IP

assembly board (option).

3. Remove the TCP/IP connector board or TCP/IP assembly board (option) from the inner

case.

C11. NIBP Module disassembly

1. Remove 2 round-head screws (3x6) from the inner case.

2. Separate the NIBP module from the inner case.

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 109 110

Sem comentários

Mediana P10 Manual de Serviço Página 78