Mediana P10 Manual de Serviço descarregar pdf (Página 54)

Troubleshooting Guide

Problems with the monitor are separated into categories for further troubleshooting

instructions.

Note: Taking the recommended actions discussed in this section will correct the majority

of problems you will encounter. However, problems not covered here can be

resolved by calling Mediana Technical Service Department.

Table 15. Problem Categories

Categories Symptoms

1. Power

1.1 : Monitor will not turn on though the Power button is pressed.

1.2 : Monitor does not power on with battery.

2. Display

2.1 : Display is blacked out after normal POST.

2.2 : Display is deformed.

2.3 : Some pixels or lines are gone.

3. Sound

3.1 : Audible alarm does not operate.

3.2 : Alarm is not silenced.

3.3 : Buzzer Alarm goes off during the POST.

4. Button/Jog Dial

4.1 : Cannot push the jog dial.

4.2 : No response from the display against jog dial operation.

4.3 : Button does not work.

5. NIBP

5.1 : Cuff does not inflate.

6. SpO

6.1 : SpO

sensor does not light.

6.2 : No display on the numeric window though sensor is lighting.

7. Temperature

7.1 : Temperature value does not display.

8. Respiration

8.1 : Respiration value is inaccurate.

9. CO

9.1 : Flow rates fall and module is not working properly.

10. ECG

10.1 : Rapid, large and erratic detections.

10.2 : Occasional noise or artifact in the waveform for one or more

leads.

10.3 : No display on the ECG waveform menu.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 109 110

Sem comentários

Mediana P10 Manual de Serviço Página 54